Introduction
Wristcam is the first camera made for the Apple Watch. It is designed to take photos and videos as well as support live communication, as well as support for developers just like your phone's camera does, so more use cases will be added with time.
The Wristcam core which holds the electronics can be removed from the Silicone band. You can purchase replacement or different color bands for your Wristcam. It's easy to switch the Wristcam core from one band to another, however please make sure to follow the instructions to avoid damaging your silicone band (a sketch of the core removal and insertion action to come here).
Setting up: Charge the device
Before using Wristcam for the first time, it's important to fully charge it or have it charged for at least one hour. Connect the core to the Wristcam magnetic charging cable through a Wristcam approved wall adaptor. A Red light on the world-facing LED indicates that Wristcam is charging. The LED might turn off after the device is fully charged. When you connect your device for the first time, the LED will glow between red and purple, which indicates it's ready to pair. If it glows Blue, it means you are not connected to the charger.
Note: In some cases, when you first charge the Wristcam, or after not charging the device for more than a few weeks, you might need to disconnect and reconnect the device to the charger to start the charging process.
Pairing Wristcam with your iPhone
While your Wristcam is connected to the charger, and the LED is glowing (red/purple), open the 'Settings' app on your iPhone, go to the Bluetooth settings section and click to pair your Wristcam. It might take up to 30 seconds for the Wristcam to be discovered by your iPhone.
Once the Wristcam is paired with your iPhone, the Wristcam app will take care of the connectivity with your Watch. The Wristcam only needs to be paired once, and connectivity is managed automatically. It is normal for the device to appear disconnected when in Standby mode. Should you need further assistance please contact support@wristcam.com
Install the App
Soon after pairing your iPhone might have suggested installing the application for the device. If you missed that notification, you can use the link or QR code to get it.
Open the Wristcam app on your iPhone and follow the onscreen instructions. If possible, allow all requested permissions throughout the process. Refer to our privacy policy for assurance the data is only used for your benefit. At this point you might take a test photo using the Wristcam button while still connected to the charger, but try to avoid taking the device off its charger until it is fully charged.
Apple Watch App install Open the Apple Watch App on your iPhone, and click on the My Watch tab. Scroll down to the Installed on Apple Watch section. If you don’t see Wristcam automatically installed, scroll further down to the Available Apps section to find it, and click Install.
Firmware Update.
Periodically, we publish updates to the Wristcam device firmware both for improvements and introduction and new features launches, It is important to keep your Wristcam up to date;and we have automated this process., In most cases, you will get a notification when new firmware is ready to be uploaded to your Wristcam and you will be able to initiate the update process with a single click within the Wristcam app on your iPhone.
Important Note: Wristcam must be connected to the charger and have at least 60% battery charge for the firmware update process to start. You should also make sure your iPhone is in proximity with the Wristcam to allow bluetooth connectivity all through the upgrade process..
To check for Firmware updates manually, open your Wristcam iPhone app and within settings, scroll to the Maintenance and Support section and click the “Check for Firmware update”. It is highly recommended to make sure your Wristcam is up to date with the latest Firmware before using it for the first time.
LED LIGHT GLOSSARY
- Constant RED, Outward Facing LED - Device is charging. It will turn off when completely charged
- Glowing Blue LED light (fade between off and blue) - Device is ready to pair with your iPhone. When charging, the outward facing LED will fade between red and purple.
- Single White Flash on both LEDS (White) - Photo/Video is activated
- Constant Flash every second or so - Video recording is active (when stopping the video the LED will turn on for a bit to indicate stop recording)
- Blue LED - Wifi activity (download and/or FW upgrade)
- Red Flash (one, quick)- device is shutting down due to either low battery, or temperature limit reached
- Faint Green light on LED - device on is on low power standby
Important safety information for Wristcam Before using Wristcam, please review the Wristcam user guide and retain it for future reference.
WARNING: Failure to comply with the following safety precautions can re- sult in electric shock, personal harm, fire, or damage to Wristcam or other property. Review all the safety precautions below before using Wristcam.
HANDLING: Handle Wristcam with care. Wristcam contains sensitive elec- tronic components and can be damaged if dropped, burned, punctured, or crushed. Wristcam may chip or crack if dropped or subjected to forceful impact. Avoid heavy exposure to dust or sand. Don’t use a damaged Wristcam, as it may cause injury.
REPAIR: Do not open Wristcam or attempt to repair Wristcam on your own. Disassembling Wristcam may cause bodily harm, and degrade or impair water resistance. Should your Wristcam become damaged or malfunction, please contact Wristcam support so we may best assist. Visit wristcam.com/support for further information about service and repairs.
BATTERY: Do not attempt to replace the Wristcam battery on your own, as doing so may damage the battery, and cause overheating or injury. The lithium-ion battery in Wristcam should be serviced exclusively by Wristcam or an authorized service provider. When receiving service for a damaged or malfunctioning Wristcam battery, you may receive a replacement device or battery (instead of your original device). Batteries should always be recycled or disposed of safely and separately from household waste, and never incinerated. Visit wristcam.com/support for further information about battery service and recycling.
CHARGING: To charge your Wristcam, use only an approved Wristcam Power Adapter or genuine Apple Power Adapter in a well-ventilated area. Apple products ensure that they are either genuine Apple products or that they have been certified as Made for iPhone under the MFi program. Certified items come with the “Made for” logo on them and/or on their packaging. Using uncertified or counterfeit accessories may damage your Wristcam and/or adversely affect operation. Use of a damaged Power Cable or Power Adapter or attempting to charge Wristcam in the presence of moisture can result in electric shock, personal harm, fire, or damage to Wristcam or other property. Do not cover Wristcam with a blanket, pillow, or other covering while charging. If you have a physical condition that affects your ability to detect heat against the body, take special pre- cautions and consult your physician prior to using Wristcam . Remove immediately should Wristcam become hot or uncomfortable.
RADIO FREQUENCY EXPOSURE: Wristcam uses radio signals to connect to wireless networks. Visit wristcam.com/support for further information about radio frequency (RF) energy resulting from radio signals and steps you can take to minimize exposure.
MEDICAL DEVICE INTERFERENCE: Wristcam contains components, in- cluding radios, that emit electromagnetic fields. Wristcam, and the Power Cable contain magnets. Electromagnetic fields and magnets can cause interference with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device, Wristcam, and the Power Cable. Stop using Wristcam or the Power Cable immediately should you suspect any interference with a medical device.
EXPLOSIVE AND OTHER ATMOSPHERIC CONDITIONS: Avoid charging or using Wristcam in a potentially explosive environment, including but not limited to areas with high concentrations of flammable gases or substances such as grain, dust, or metal powder. Exposing Wristcam to environments having high concentrations of industrial chemicals, including near evaporating liquified gasses such as helium, may damage or impair Wristcam functions.
CHOKING HAZARD: Some Wristcam bands may present a choking hazard to small children. Please be mindful and exercise appropriate caution.
SKIN SENSITIVITIES: Some people may experience reactions to certain materials used in jewelry, watches, and other wearable items that are in prolonged contact with their skin. This can be due to allergies, environ- mental factors, extended exposure to irritants like soap, sweat, or other causes. You may be more likely to experience irritation from a wearable device if you have allergies or other sensitivities. If you have known skin sensitivities, please take special care when wearing Wristcam. One is more likely to experience irritation from wearing Wristcam if worn too tightly. Remove Wristcam periodically to allow your skin to breathe. Keeping Wristcam elements clean and dry will reduce the likelihood of skin irrita- tion. If you experience redness, swelling, itchiness, or any other irritation or discomfort on your skin in close proximity to Wristcam, immediately remove the device and consult your physician before resuming wear. Continued use, even after symptoms subside, may result in renewed or increased irritation.
WRISTCAM ONE-YEAR LIMITED WARRANTY: Wristcam Inc. of San Mateo, California, U.S.A. (“Wristcam”) warrants the Wristcam-branded hardware product and Wristcam-branded accessories contained in the original pack- aging (“Wristcam Product”) against defects in materials and workmanship when used normally in accordance with Wristcam’s published guidelines for a period of ONE (1) YEAR from the date of original purchase by the end-user purchaser (“Warranty Period”). Wristcam’s published guidelines include, but are not limited to, information contained in tech-nical specifications, user manuals and service communications. Wristcam does not warrant against normal wear and tear, nor damage caused by accident or abuse. Subject to the full terms and detailed information on obtaining service available at wristcam.com/support. Wristcam will choose to repair, replace, or refund your Wristcam at its sole discretion.
IC AND FCC COMPLIANCE STATEMENT: This device complies with the Industry Canada license-exempt RSS standards. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250- 5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725- 5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation as appro- priate.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650- 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
FCC Caution: Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF EXPOSURE Warning: This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
EU DISPOSAL INFORMATION: This symbol indicates that this product and/or battery must not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Wristcam software must be installed on an iPhone and an Apple Watch in order to use the device.
IMPORTANT: Please review all regulatory and safety information prior to use at www.wristcam.com/support
Regulatory information can also be found in: Wristcam Companion Application under Settings > Legal & Regulatory tab.